Archive for the 'Wire' Category

Sampling

This is basically an update from my Components and Sampling post a few weeks ago (1-Oct-2018). Little bits of this and that, hopefully not signifying nothing. I’ve decided to go with what’s exciting me most first, rather than chronological.

Leno
The Anni Albers book (20-Oct-2018) has me buzzing. I had to put the book down and get something into my hands. How’s this for a potential component?

This was done off-loom, held in my hands for ultimate flexibility. That worked quite well for the twined sections, but the leno got a bit wild.

The detail shot below is on a 1 cm grid, to give an idea of scale. Most of the wire is 28 gauge, with a heavier wire used in the header and the actual cross of the leno.

Yesterday for the first time in a long time, I dressed a loom. Well… I’m using the 4 shaft Robinson loom as a frame, not involving a reed or shafts, not putting great tension on the 28 gauge wire. So far the wire is looped on (a variant of a technique I saw long ago on quick dressing a rigid heddle loom), and held in order with a couple of rows of twining at each end. I carried two wires together, bare copper and silver-coated, with ideas of some colour and weave experimenting. The plan is to do everything using pick-up techniques.

Can I get the structure, the variation and interest I want, with tension sufficient to help me working and keep from tangles while loose enough to keep it dynamic and flowing?

It’s on a brief pause at the moment while I make space on my work table, to move the loom from the side bench which doesn’t have great light (there used to be enough there, but something’s changed over the years 🙂 ).

Looping experiments
Different gauges of wire.
The red is 12 gauge aluminium from Apack. The heavier brass colour 20 gauge (anonymous, from the stash). The finer one is actually brass, 0.5 mm (about 24 gauge), A&E metals. The fine “silver” is 28 gauge coated copper wire from Over the Rainbow (polymerclay.com.au/).

All of these were very easy to use, with no complaints from the joints (although keeping in mind these are small samples, each using one wingspan of wire).

The resulting “fabric” is quite easy to form and manipulate, and holds shape well in most directions.

Going dimensional.
Beautiful, bouncy, like unintelligible handwriting. In fact this is looping, with each loop upwards pulled through a little, twisted and bent 90 degrees to make it thoroughly three dimensional. The wire is 24 gauge “black reel wire” from Apack. I think it’s annealed steel (from the person who told me about the supplier), but can’t be sure. No signs of rust. Soft and easy to use. The fabric created holds shape very well, and all those projecting loops look full of potential for building further or embellishing.

Crochet
This is more of the 0.5 mm brass, using crochet. It’s a denser fabric. There’s a sort of dimensional corrugation with the rows worked back and forward, but overall it looks a little heavy and stable – not dynamic and lively. The killer is that I got some thumb joint pain even in this small piece. Not something I’m likely return to – certainly not with this gauge wire.

Twining
In wire.
The beginning of some twining, working in 28 gauge wire.

In structure and in technique (the thumb flip) just what Mary Hettmansperger taught using waxed linen (17-Sep-2018). This is much more open, and of course holds shape well without reinforcement with mod podge.

It’s meant to be semi-mindless work to cope with TV-watching (I’m no good with tension – if the music changes to a buildup, I dutifully get scared). However I’m finding it a little fine for that – I need good light (hmm… a connection with earlier comments???).

For painting.
The first of these little pots was seen 1-Oct-2018. My technique has definitely improved with the second, larger pot. The lid is domed because I made it a bit big 🙂 . It’s been languishing a few weeks now. I’m hoping the alteration of proportions will let me do more of a slice down the height of the inspiration painting.

Folding
Pretty much on a whim, I recently bought The Art of the Fold: How to make innovative books and paper structures by Hedi Kyle and Ulla Warchol. I have lots of paper around, sketches and prints and experiments that have piled up. Perhaps I could fold them, transform them into something more satisfactory. Lovely book – good instructions and diagrams, techniques and structures that get reused, elaborated, extended, as the projects progress. Lots of great inspiration photographs.

My first attempt (apart from familiarisation bits on plain paper): a pocket accordion with separate cover.

So small and pretty! About 10 cm high, 5.5 or so wide. Very satisfying. While not apparent to others, I particularly like the refreshing and encapsulating of memories. The cover is leftovers from a class with Adele Outteridge (25-Jul-2014). The inside pages are from a large sheet of cartridge paper. I went back through months of photos to identify it – from a printmaking session back in 2016 (24-Jul-2016). That detective side excursion on a side excursion was a pleasure and revelation in itself – so many exhibitions, and travels, and classes, and so, so much making! Even the little inserts capture memory. I don’t know if you can see in the photo the inserts are paint cards, and one colour has been selected for the bathroom wall – but not my bathroom. In a class with Keith Lo Bue last year (23-Apr-2017), there was an exercise where we each put three things we’d brought onto a table, and we each selected three things from other people to use as raw material. My final choice, with not much left on the table – the rather uninspiring paint cards. A fairly random moment resurfaced, memorialised, made special.

Happy 90th birthday mum!

Recently my mother celebrated her 90th birthday, with a big party for friends one week and a weekend away with family (four generations, 22 of us) the next. For many years her mantra for a healthy life has been to include physical, mental and social activities in every day. The pace is a little slower now, but the interest in and care for others, her curiosity and keenness to explore the world around her, are constant.

I’m the middle one of five children, and we worked together to organise the celebratory Festival of Margaret. Among many other activities, mum used to run a Friday afternoon Craft Club, not just for the five of us but for all our friends around the neighbourhood. That’s the genesis of my joy in making, and I really wanted to bring one or two elements of that into the party.

First, how to identify the hosts – the children? Matching nametags, a photo of the five of us, modified to highlight who was who. Below is mine, plus me in full flight giving a response to mum’s speech.

Second, how to help people mix given they were such a diverse crowd? Make-your-own nametags, with lots of coloured pens, pencils and stickers to play with. Some were more elaborate than others, and only a couple were left behind for me to photograph.

Next, my sister suggested a wishing tree. One thing led to another.

Instead of simple tags, something big enough to write a little story about shared times? So everything got a little bigger and it became a message tree.

Instead of a plain or generic back, why not personalize it and bring in some colour? Mum has always been a keen traveler. I used the background of photos of her on her journeys and printed them onto the message cards – 88 different images. The example on the right is from a beach on King Island, a wonderful and eventful weekend together back in 2012 (7-Oct-2012).


For the tree I used straightened 2.0mm galvanised wire, twining with 0.7mm wire. Given the number and size of cards it needed to accommodate it had to be fairly large – around 85 cm tall and 69 cm diameter. It’s very stable on the wide base.

You can see a bit of the tree in action behind mum in the top photo. Shown here is a mockup before the party when I was testing the idea.

The tree and basket of cards were on the same long table as the gear for making nametags, and there was a real buzz around them. People shared some funny and happy memories, and wishes for the future.

It was a great party, a really positive and friendly vibe. Other siblings were responsible for organising an extensive slideshow of mum from baby to now (my goodness she’s traveled far and wide!), some yummy afternoon tea, a beautiful cake, colourful decorations, set up and smoothing things along on the day… everything to make sure that mum could relax and enjoy her day. I felt so proud and happy for her, and also so lucky to have such a family.

The next day I used the hanging loops and some more ribbon to join the cards into a book-like form. It’s sitting on mum’s kitchen table, a momento of a happy day.

This slideshow requires JavaScript.

The second, family only weekend was great too. More talking, laughing, eating, and a lot of activity enjoying time together. There will be a little making coming out from it, but that hasn’t happened yet.

Metal and more

Codename Confluence
Previously this was known as “other potential project” (4-Feb-2018). Thinking and work is progressing on the new piece, still based on moving water, particularly river currents, eddies, backwaters, billabongs… I’m expecting it to take the form of a mobile (not locked in yet) – balance is another part of the story. So far focus has been on developing some individual elements, looking for some level of transparency so they interact with the light and gallery environment.

Silver fabric in resin, coiling

Photographed propped against a waterglass to give an idea of how it could look in open space, this is about 11.5 cm diameter. Not convinced I like the soft texture of the threads against the hard surfaces of resin and galvanised steel wire I’m using elsewhere. The v-stitch of the coiling reminds me of zigzag graphic designs for water.

Thread in resin, neolithic twining in wire

Really like this combination of threads in resin and neolithic twining in steel wire. It’s 12.5 cm wide. If I have time I want to make a companion piece exploring this combination further.

Metal smithing class with Jane Tadrist
Nine hours over three weeks at Sydney Community College, this was a great chance to consolidate and extend my metal working skills.

Copper tealight in progress

We could choose to make a cuff or a tealight. I really wanted to get a handle on soldering, so went for the tealight. The design reflects my “moving water” theme, and was deliberately kept simple so I could finish in good time.

Soldering was completed in the final minutes of the class (yay!). I should be able to do the finishing here at home.

vessel wip from Christian Hall class

Sadly that meant I didn’t have time to complete the soldering still required on my little vessel begun in the Christian Hall workshop (7-Jan-2018). In theory Jane was happy for me to work on it – but dratted time got me again.

Hope is not lost. I’ve booked on another class with Jane later this year. Maybe third time lucky for this little brass object. Another possibility is setting up a soldering area in my workroom at home – hoping that will happen before the end of the year.

Lady and the Unicorn exhibition
Six stunning tapestries made circa 1500 are now on exhibit at the Art Gallery of NSW, on loan from France.

Detail of The sixth sense – heart, desire or will

While there are side galleries of interpretive detail, the actual tapestries are in a single dimly lit room, surrounding the viwer. The impact is amazing. I’m not sure how big they are. The Lady could be near life size.

Still a detail

The photo above shows one small detail in the largest tapestry. To the right is another view of the same piece – still just a detail.

There’s lots of information and many much better photos on the gallery website linked above. All very accurate and objective and academic. The works themselves, the whole experience of standing there drinking them in, is an emotional and physical thing.

ARTEXPRESS 2018 exhibition
Also at AGNSW is this year’s selection of student artworks developed for the artmaking component of the HSC examination in Visual Arts 2017.

How Irrigating
Hannah Raeside

A wonderful mix of media and intent. I particularly enjoyed Hannah Raeside’s work playing with garden hose and fittings. It’s an exploration of shape and form, taking something very prosaic and creating abstract beauty.

Some momentum

Pace and energy are beginning to build. It’s a good feeling.

Object 2 of embargoed project 1 has been painted and just needs a check, touch up and tidy up to be done. It’s due for installation with its peers later this month. A teaser photo when it’s entirely done, and hopefully full details of the project can be shared soon.

The other potential project is looking more and more certain. I’m contributing two pieces.

Waymarker

The first has been seen before – an output from the welding sculptures workshop with Paul Hopmeier last year (22-Jan-2017). Given this new (still potential) exhibition is being developed in a very short time, recent and relevant work is being accepted as well as new work.

The work was never entirely finished, so the rust has been largely cleared off (not entirely – I think some is appropriate to my ideas about it) and some wax has been applied for a glow and to protect against ongoing rusting. I’m really happy that it’s going to have a chance to been shown.

Play continues on a new piece for this exhibition. The thinking behind includes currents and eddies and flashes of sunlight in a river.

Some looping techniques in different weights of wire might just possibly suggest droplets of water in the sun. A range of synthetic fabrics in watery colours have been heat treated and I’m planning resin. On the right is a scrap piece of resin with threads embedded, cut out and used as a centre for neolithic twining (? never sure of this – need to check with the basketry people) in wire. Not the colours I want, but some very exciting possibilities being generated.

Also this week I started a beginners class in silversmithing. Too soon to have anything to show, but it seems exactly what I need to address the problems experienced in the Sturt summer school class (7-Jan-2018).

There’s even been reading! Plus the first of this year’s lecture series at the Art Gallery.

Glimpses of potential

Back at the day job + warm weather = slow progress

Object 2 of the embargoed project has been a roller-coaster. There are competing practicalities of sturdiness and weight – last night I was thinking of abandoning the attempt, today a balance seems closer. Basic construction is close to complete, but lots of finishing ahead.

It’s been an opportunity to try out a new tool – a ClampTite. This elegant little steel and brass number helps you bind wire around – well, nice firm tubes are easiest, but pretty much anything as long as you have space to work it. My project wasn’t ideal, but still a big improvement both visually and in effectiveness over my hand bound attempt on the left in the photo.

Play continues on the potential project. I’ve been thinking about all the materials and techniques I’ve been using in the last couple of years, also how I want to work (Ruth Hadlow’s streams). It might seem like I’ve been going in all sorts of directions, but things circle round, come together, inform each other, find some kind of balance…

More mobiles

A quiet week with a little progress in balancing and mobile making. Turns out it’s tricky to photograph something designed to move 🙂

First a mobile in .9 mm galvanised steel wire. About 16 cm high.

Very simple, but a good exercise to practice skills.

Next, I couldn’t wait to give earrings a go. I currently have asymmetrical hair, which is a wonderful excuse for mismatched earrings (not that I need any excuse). Design heavily influenced by earrings on Keith Lo Bue’s website. First the blurry action shot.

And the detail shot. It’s .7 mm galvanised steel wire except for the earwires (salvaged from a bought pair of earrings), so avoiding prolonged contact of the galvanised with skin. The discs are shell, with some 4mm Miyuki cube beads.

I spent ages trying to tweak the way the mobile earring hangs. Couldn’t quite get it, but in practice it moves pretty constantly so should look fine. Happy with these.

Approaching wire

I’ve been circling around, making different starts with wire, seeing what might come together.

Egg head

Ages ago (last year?) in a drawing class, tutor Sue Vesely brought hard boiled eggs marked up to show various angles and spacing of the human head. I’ve since made a version of my own, using Sue’s notes and a toy (rubber?) egg. Could I make these shapes and lines using wire and random weave basketry techniques?

It turned out I couldn’t. Nothing to show – it was quickly dismantled, cut up, reused…

… some of it into this face.

Which also doesn’t particularly thrill me. Clumsy lines, not the right selection of which lines to include. This weight of steel (construction wire, annealed steel, 1.57 mm diameter, 16 gauge) was difficult to work with at this scale (slightly less than life).

Not a dead end, but not an enticing path for now.

Another experiment using broken ceramic and wire in random weave also didn’t quite work for me in its first form.


The same steel wire, smoothed and drilled fragments from a cup and saucer, random weave.
The blu-tac is to hold bits in place until I could stabilise placement. Each shard has 3 holes, which I thought would allow enough connections to create a stable non-vessel.

Once again the gauge of the wire, its stiffness when working, caused me grief. When bending wire I was constantly at risk of breaking ceramic, and without sufficiently bending the wire to hold them the pieces kept sliding around.

More recently I’ve been introduced to galvanised steel wire. Lots of different gauges in the hardware store, doesn’t rust (although the shine wouldn’t suit all purposes), not a good choice for jewellery, but a great new option in this kind of work. The old 16 gauge wire has been cut off and new work begun. It’s going reasonably well, but needs to progress before any more photos.

More of the same 16 gauge wire and the ceramic, and still not satisfied with the various possibilities I’ve generated so far. The proportions of the ceramic and wire elements isn’t pleasing. The curve of the wire (from my new dapping set) doesn’t sit well with the different curves of the ceramic pieces. Beads of different sizes have been trialled at different positions, and then the earrings get too long.

I’m really not in a grouchy mood and I don’t think the inner critic is getting out of control. There are possibilities here, just so far none I would wear. It will come.

Now some happy snaps. My friend Claire and I got together for a day of dipping wire in paper pulp. Neither of us had previous experience, so it was all free experimentation. Claire brought the pulp – made from waste cardstock. We both had different types of mesh and wire. There’s more detail and process shots on Claire’s blog – https://tactualtextiles.wordpress.com/2017/08/07/paper-pulp-dipping/.

Here are some of my results.


Above: the pulp built up well on bird wire mesh. On the left is the form as dipped. When dry I was able to change the form, the paper remaining attached.

Above: two views of a form created before the mesh was dipped. A much firmer and sharper end result (compared to re-shaping a dipped piece).

Above: two more vessel forms, quickly random woven together using galvanised wire. I’d like to try this again with more preparation time, creating smaller spaces that the pulp would span better. It tended to slide off these.

This slideshow requires JavaScript.


Above: a range of forms, wire and an offcut of bird mesh. The pulp held better on the smaller spaces.

This slideshow requires JavaScript.


Above: the “flower” wouldn’t hold the shape. Some extra fine wire across the leaf helped marginally. The two views of a single “earring” show the impact of lighting on this material.

Above: the two sides of a piece of copper mesh that I had distorted.

Above: more mesh and pulp experiments. Love the combination of copper and the warm cream of the paper.

There’s lots of promise in these results. Some lessons learnt, some really nice effects. I’m hoping Claire and I can arrange another day – with enough lead time for more preparation. Maybe a series of days (or in summer??), so we can let things dry between dippings.

Finally, some first steps following Keith Lo Bue’s Poetry in Motion DVD workshop – http://www.keithlobue.com/product/poetry-in-motion-making-marvelous-mobiles-dvd-workshop-set.

This is what led me to galvanised wire, opening various doors as mentioned above. I’ve worked through the first couple of exercises, and am feeling excited and inspired.

First up was a clever way to straighten wire, plus practice in creating precise shapes and angles. I think a series of these piled up has much more promise of an interesting and dynamic composition than my earlier attempts at wire lines at the top of this post.

Next was an exercise learning to find and fix balance points. Back to 16 gauge wire (galvanised this time), plus corks.


Above: my very first mobile, in two variations. On the left, a flat, horizontal form that spreads out in space. On the right, a simple change in the orientation of one looped end changes the form to a broken straight line, descending in space.

I can see potential for a number of the approaches above to combine into a fruitful line of investigation – even those that left me cold as stand-alones. It’s the end of the weekend, work tomorrow, but I’m rubbing my hands in anticipation.


Calendar of Posts

November 2018
M T W T F S S
« Oct    
 1234
567891011
12131415161718
19202122232425
2627282930  

Enter your email address to follow this blog and receive notifications of new posts by email.

Archives

Categories