T1-MMT-P2 Jet James – Experimental Collagraphs workshop

Experimental Collagraphs was a recent weekend workshop organised by ATASDA.

Jet James

Jet James

Jet James is a young artist based in Yeppoon Queensland, who works in a range of media but currently focuses on printmaking. On the right is an image of a print I bought from him. You can see many more images on his website, http://www.jetjames.com.au/.

A few years ago Jet worked with another artist in an intensely experimental period. His “experimental collage” method comes from that. Working with 3mm pvc board as printing plate, Jet embosses the surface with natural and found materials. The leaves and dragonfly you see in the print were actual leaves and dead dragonfly, laid on the board and pressed through the printer. Using oil inks and an intaglio method, the embossed depressions create dark lines and areas in the final print.

Jet can create additional dark areas by texturing the pvc, using lino cutting tools, sandpaper… He creates light areas by adding materials that don’t take the ink, including nailpolish, car paint-sprays, gel mediums… Tape varies in effect. Things like plastic packing tape resist ink and create light marks, while paper tape soaks up ink and creates a dark. Then some tapes have a surface texture. It’s basically a matter of looking around and experimenting.

experimental collagraph 01 - ready for embossing

experimental collagraph 01 – ready for embossing


Wanting to connect to my Mixed Media course, I used a number of past samples in the embossing stage. From left to right we have acrylic felt from p1-70, up to the right p1-55, below that p1-61. Next is insect mesh, seen frequently in the past, then p2-10.
experimental collagraph 01 -embossed

experimental collagraph 01 – embossed

Here is the embossed plate, held at an angle in an attempt to show the texture created.

To print the plate, I spread blue/black ink over the entire surface using a credit card as a tool, then rubbed off the surface with phone book paper. A smear of ink was left overall, and larger amounts in the depressions. I printed on to damp Stonehenge paper. The first few prints were on white.

experimental collagraph 01

experimental collagraph 01

Obviously things are flipped around in the printing.

For a first go I think this is amazing. Others in the class started straight away with building up images, but I wanted to stick with general experimentation. Everything I tried here gave lovely clear exciting textures.
 

experimental collagraph 02 - ready to emboss

experimental collagraph 02 – ready to emboss

From the left – p1-69, cardboard from p1-126, cut outs from p2-24, a feather (some seen in p1-33), and p1-75 (also seen in p2-28).

The thin, light foil shelf-liner cut outs didn’t make any impression, while only the spine of the feather had an effect. I later painted on some gel structure medium to create a raised area that should largely resist ink.

experimental collagraph 02

experimental collagraph 02

I think the ladder effect created by the cardboard is the standout here, and the splodge of gel medium also shows promise.
 
experimental collagraph 03 ready to emboss

experimental collagraph 03 ready to emboss

A torn-down p2-11 was embossed on the third plate. I then scratched into the surface with various weights of sandpaper and a variety of other scratching tools. Lines were drawn in different nail polishes (some with glitter for extra texture). There was also a selection of different tapes added.

experimental collagraph 03

experimental collagraph 03

A range of interesting effects to add to the toolkit.

sketch20121022Next I wanted to attempt a composition of some kind. Here I came unstuck. I considered going abstract and had a range of materials to emboss circular variations, but instead I went for a sketch I dimly remembered from King Island (see 6-November-2012). Unfortunately I’d left my tablet at home and didn’t have a copy of the sketch.

I embossed layers of sandpaper for some beach texture, a rather too thick piece of polymorph plastic to create foreground rocky texture, and p1-61 again for the sea (unfortunately not so effective this time – perhaps flattened by the earlier work). I then cut grasses with a lino cutter, and roughened areas with sandpaper. I printed onto a fawn coloured paper.

experimental collagraph 04 version 1

experimental collagraph 04 version 1

Some of the elements aren’t bad, but it just doesn’t come together. The shore line is too central and vertical, the sea on the left is bland, the ground behind the grasses too similar to the general colour in the foreground.

Rather than start another plate it seemed a good exercise to try to improve on this one.

experimental collagraph 04 version 2

experimental collagraph 04 version 2

I used a variety of nailpolishes and other resist-type pens, looking for some highlights and movement in the sea. Sandpaper was used at the top to try to connect the shoreline to the upper margin.

To address the values problem on the right I tried to manipulate the amount of ink removed when rubbing back, taking off more in the top area and leaving a lot below. Unfortunately I lost some of the good foreground texture in the process.

Others have disagreed with me and preferred the first print, but I think I was effective in addressing a number of the issues I saw. A very worthwhile exercise.

Since the workshop I’ve tried creating a new plate and print. This was using a craft roller machine intended for embossing and cutting by scrapbook enthusiasts. It limits possibilities, being small (A4 can go through, so smaller plate size), would break if I tried to create too much pressure, and has a fixed height between the rollers. You try to get the right pressure for a particular task by adding different thickness boards in the roll-through package.

experimental collagraph at home

experimental collagraph at home

This is the result, on more of the fawn Stonehenge paper. I used p1-70, some cardboard, insect mesh and a plastic net fruit bag when embossing. I don’t have any printing inks, so used acrylic paints with some gel retarder to give myself more working time. When printing I put it through twice, as there was insufficient pressure first time through.

Yes, there are lots of problems, but the focus needs to be that I was able to emboss and print at home!!! For that point alone this is an excellent result.

Part 4 of the Mixed Media course is mono and collatype printing. The techniques suggested in the course notes are quite different, so it will be really interesting to use Jet’s ideas as well and do some compare and contrast. Before then I’ll get some oil inks and a supply of pvc board, and maybe there will be a chance to sneak in some practice.

T1-MMT-P2 Jet James – Experimental Collagraphs workshop
Textiles 1 – Mixed Media for Textiles
Part 2: Joining and wrapping
Workshops etc: Jet James – Experimental Collagraphs Workshop

10 Responses to “T1-MMT-P2 Jet James – Experimental Collagraphs workshop”


  1. 1 jane b (epocktextiles) July 16, 2015 at 6:41 pm

    I saw some of Kay & Margaret’s work from the workshop today – looks like it was very exciting and inspirational

  2. 2 fibresofbeing July 16, 2015 at 6:50 pm

    Aren’t they both amazing – so talented and incredibly hard-working.

  3. 3 Su July 21, 2015 at 9:36 am

    I really like your experimental work today. I think it could really lead to something …


  1. 1 T1-MMT-P2 Joining and Wrapping – Sorting | Fibres of Being Trackback on August 2, 2015 at 10:09 pm
  2. 2 T1-MMT-P3 Molding and casting – Initial Research | Fibres of Being Trackback on August 7, 2015 at 10:59 am
  3. 3 T1-MMT-P4-p2-e1 Collage blocks | Fibres of Being Trackback on December 13, 2015 at 9:12 pm
  4. 4 T1-MMT-P4-p2-e2 Polyfilla block | Fibres of Being Trackback on December 17, 2015 at 10:24 pm
  5. 5 T1-MMT-P4-p2-e3 Collatype collage prints – low texture experiments | Fibres of Being Trackback on January 2, 2016 at 9:12 am
  6. 6 T1-MMT-P4 Mono and collatype printing: Review | Fibres of Being Trackback on January 3, 2016 at 4:57 pm
  7. 7 Dimensional / depth weaving | Fibres of Being Trackback on June 26, 2016 at 3:52 pm

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s




Instagram

Germination II
In Basketry NSW Transformation exhibition Sunday 2 July. More info fibresofbeing.wordpress.com

Calendar of Posts

July 2015
M T W T F S S
« Jun   Aug »
 12345
6789101112
13141516171819
20212223242526
2728293031  

Archives

Categories


%d bloggers like this: